Here is a great fence we sprayed this last week for a good friend of deck tech. He had built a fence using
big bamboo framed in a black stained frame.
Deck Tech Pressure Washing Bend, Oregon. We provide pressure washing and full exterior wood restoration of decks, fences, wood front doors, and almost any stained exterior wood. We have been working with exterior wood restoration for over 14 years here in Central Oregon. Exterior wood restoration is all we do. Fast, affordable and done right the first time. Free estimates
Stevenson Ranch Deck Restoration
 |
| Just after sanding and washing |
For the Stevenson Ranch deck restoration we went for a stage 2 sand, wash/brighten, and stain 2x with Deck Tech custom color uv plus stain. We had the task of restoring all 4 decks, buttress beams, and rafter tails. It was no easy task as none of the surfaces had seen stain in over twenty-five years and the wood is over forty years old.The neat thing was that a lot of the decking was made of tamarack wood and clear cedar.
 |
| After 2nd stain and dry wiped |
Before video
Building Restoration for Griffin heating
On this job we had the task of bringing some life back to the old Griffin heating building and two outbuildings. It had been some time since they had a fresh coat of stain applied so here is what we did. First a light hand sand, then a brightening solution and power wash, then mask and stain with Deck Tech #6 custom stain.
Time to brighten and remove old stain
 |
| Tyler wearing his safety gear when |
using brightening solutions
Stain time. This time we go with a custom Deck Tech # 6 stain made to match existing colors
Stage 1 full deck restoration( the best you can get )
This deck is in the N.W. hills of Bend, Oregon. It had been many years since it had been restored and needed a lot of work. Also, the deck had been poorly restored in the distant past leaving bad pressure washing and sanding scars. The final challenge of the full restoration of this deck was that the boards were very convex (raised up in the center).
So here is what we did to get it back to almost new condition. First, all the blind nails had to be set, then a few days of sanding is next. (Deck Tech uses no less then 6 different sanders to get the job done) Then the wash and brighten, and finally comes the stain which is two coats of Deck Tech's special mix and color. We have developed colors that add U.V. protection and are applied with special tools to maximize penetration.
Now the deck is ready to enjoy for years to come and is done without the use of harsh deck strippers that can harm your house and plants.
So here is what we did to get it back to almost new condition. First, all the blind nails had to be set, then a few days of sanding is next. (Deck Tech uses no less then 6 different sanders to get the job done) Then the wash and brighten, and finally comes the stain which is two coats of Deck Tech's special mix and color. We have developed colors that add U.V. protection and are applied with special tools to maximize penetration.
 |
| The deck boards were very convex and weathered |
 |
 |
| There was a lot of stain build up in the shaded areas |
 |
| The front entrance |
 |
| The sanding |
The staining step. Second coat is done               |
Subscribe to:
Comments (Atom)